Alat Laboratorium Teknik SIpil

HUBUNGI KAMI : 085222177772
  • Produk Alat Laboratorium Teknik Sipil
    • Laboratorium Tanah
    • Laboratorium Batuan
    • Laboratorium Semen
    • Laboratorium Beton
    • Laboratorium Aspal
    • Alat Lab Hidrolika – Alat Lab Mekanika Fluida
    • Peralatan Pertambangan
    • Peralatan Survey
    • General Equipment
  • Kalibrasi & Servis
  • Galeri Produk
    • Alat Laboratorium Tanah
    • Alat Laboratorium Batuan
    • Alat Laboratorium Semen
    • Alat Laboratorium Beton
    • Alat Laboratorium Aspal
    • Alat Laboratorium Hidrolika – Mekanika Fluida
  • Hubungi Kami
ALAT LABORATORIUMCIVIL, MINING, GENERAL EQUIPMENT
  • Home
  • Galeri
  • Alat Laboratorium Tanah
  • TUBE DENSITY SAMPLER
June 21, 2025

TUBE DENSITY SAMPLER

TUBE DENSITY SAMPLER

TUBE DENSITY SAMPLER

ASTM D-2935

For surface soil sampling

  • Driving Hammer : Machined Steel , Plated, 10 lbs, Slidding Weight.
  • Sampling Tube : Machined Steel , Plated, 2” dia., 6.7” length.

Dimension (l x w x h) : 25 x 25 x 100 cm / Gross Weight : 35 kg.

Category: Alat Laboratorium Tanah

Related products

  • PLATE BEARING TEST SET

    ASTM D-1194  /  AASHTO T-235

    Consist of :

    • For determining ultimate bearing capacity of soil on place by means of field loading test.
    • Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated.
    • Manometer : 6″ diameter, 30 tons capacity, 0.5 tons,incremen.
    • Hydraulic Cylinder : 30 tons capacity.
    • Hydraulic Hand Pump : Double action, 10.000 psi capacity.
    • Hydraulic Hose : 10.000 psi, 180 cm length.
    • Reference Beam : Steel pipe, 2 x 150 cm span.
    • Circular Bearing Plate : 6″ diameter, machined steel, 1″ thick.
    • Circular Bearing Plate:  10″ diameter, machined steel, 1″ thick.
    • Circular Bearing Plate : 12″ diameter, machined steel, 1″ thick.
    • Circular Bearing Plate : 18″ diameter, machined steel, 1″ thick.
    • Circular Bearing Plate : 24″ diameter, machined steel, 1″ thick.
    • Circular Bearing Plate : 30″ diameter, machined steel, 1″ thick.
    • Square Bearing Plate : 12″ x 12″, machined steel, 1″ thick.
    • Dial Indicator : Travel range 30 x readibility 0.01 mm.
    • Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-off switch.

    Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg

     

  • Specific Gravity Heating Methode

    ASTM D-854  /  AASHTO T-100

    For determining specific gravity of soil sample.

    Consist of :

    • Hot Plate : Electric, 1000 Watt, 220 Volt.
    • Asbestos Wire Gauze : Asbestos centre, 15 x 15 cm.
    • Mixing Bow : Stainless steel, round type, 24 cm diameter.
    • Density Bottle : Glass made, 100 ml capacity..
    • Funnel : Glass, wide mouth.
    • Wash Bottle : Plastic, 250 ml capacity.
    • Thermometer:  Range 0 to 100°C, glass, alcohol indicator, 30 cm.

    Dimension (l x w x h) : 40 x 40 x 40 cm / Gross weight : 10 Kg

     

  • TRIAXIAL Test

    ASTM  D-2850

    The triaxial test set provides test load up to 300 kgf at any speed from 0.00 to 3.00 per minutes.This features provides the capability for use in application such as constant rate of load and constant rate of stress.The triaxial test has direct digital reading for pore pressure measuring and single switch for loading or unloading lot sample making it extremely easy to use.A movable cross-head allows a wide range of sample size to be tested with simple adjusment.Optional proving rings for load measuring device are available for accurate load measurement up to the capacity of the unit.

    The unit incorporates :

    • Triaxial Compression Machine : CD or UU & CU, capacity 300 kgf, loading speed 0.00 to 3.00 mm per minute, cell (speciment) size 35mm and 50mm maximum, Control power on-off switch, fast advanced selector swith.Variable speed, hand-operated and motorized operated with electric consumption 220V AC/ 200 W.
    • Load Measuring : Load ring 300 kgf  capacity.
    • Displacement Measuring : Dial gauge 30 mm x 0,01mm.
    • Measuring Pore Pressure : 10 Kg/Cm (Digital reading for pore pressure value.
    • Measuring Cell Pressure : 10 Kg/Cm (Manometer).
    • Measuring Back Pressure : 10 Kg/Cm (Manometer).
    • Burrete : for measuring pore pressure.
    • Top Water Tank : Plastic, 3 litre capacity.
    • Buttom Water Tank : Stainless steel, 5 litre capacity.
    • Vacuum Tank : Stainless steel tank.
    • Chamber : Made of non corrosive material and acrylic transparent.
    • Sample Pad : for 35 mm diameter specimen.
    • Sample Pad : for 50 mm diameter specimen.
    • Air Regulator : for cell pressure.
    • Air Regulator : for back pressure.
    • Compressor Unit : Compressor pump 0-10 Kg/ cm.
    • Vacuum Unit : Vacuum pump 0-70 cm Hg, rotary type, 220 V-AC, 1/2 HP, 1 Phase.
    • Placing Tool : O-ring,  50 mm diameter.
    • Placing Tool : O-ring,  35 mm diameter.
    • Suction Membrane Device : Stainless steel, 50 mm diameter.
    • Suction Membrane Device : Stainless steel, 35 mm diameter.
    • Two Ways Split Former : 50 mm diameter.
    • Two Ways Split Former : 35 mm diameter.
    • Sample Tube : Stainless steel tube, 50 mm diameter.
    • Sample Tube : Stainless steel tube, 35 mm diameter.
    • Membrane : Rubber, 50 mm diameter.
    • Membrane : Rubber, 35 mm diameter.
    • Membrane Sealing Ring : Ring rubber, 50 mm diameter.
    • Membrane Sealing Ring : Ring rubber, 35 mm diameter.

    Overall dimension : 200 x 80 x 180 cm / Gross weight : 195 Kg

     

Kontak Kami

Marketing Office:
Jl. Ciloa No. 116 Rt.03/Rw.10. Kp. Pameungpeuk, Ds. Pasirhalang, Kec. Cisarua. Kab. Bandung Barat, Jawa Barat 40551

Head Office:
Jl. Perisai F-12, Komp. Cilame Permai, Ngamprah, Kab. Bandung Barat 40552

Marketing Support ;
085222177772 / Deddy

Visitor Counter