Consolidation Test

ASTM D-2435 / AASHTO T-216

For determining the rate and magnitude of consolidation of soil when it is restrained laterally,loaded and drained axially.

Consist of :

Frame : Cast alumunium, two test unit.
Loading set : Three alternative lever arm 1:9, 1:10, 1:11.
Consolidometer : Brass, 50.5 mm sample dia.,porous stone,loading capacity.
Loads : 500 gr weight.
Loads : 1000 gr weight.
Loads : 2000 gr weight.
Loads : 4000 gr weight.
Loads :8000 gr weight.
Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder.
Dial Indicator : Range 10 mm x 0.01 mm.
Wire Saw : 10 cm length approx.

Dimension (l x w x h) : 80 x 80 x 150 cm / Gross weight : 130 Kg

Category: Alat Laboratorium Tanah

Related products

Moisture Content Test
For determining moisture content of soil sample.

Consist of :

Cent O-Gram Balance : 311 gr capacity x 0.01 gr readability Front beam : 1g x 0.01g ; second beam : 10g x 1g Third beam : 100g x 10g; rear beam : 200g x 100g.

Drying Oven : 53 litre capacity ; natural air circulation, temperature Stainless steel interior (w x h x d) = 400 x 400 x 330 mm. Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm.from +30 °C (however, at least 5 °C above ambient) up to +220 °C. Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C. Electric load (during heating) approx = 1400 Watt.

Thin Box : Alumunium, 60 gr capacity.

Dessicator : Transparent glass, 24 cm diameter approx non vacuum type, supplied with silica gel.

Dimension (l x w x h) : 80 x 80 x 90 Cm / Gross weight : 70 Kg
Compaction Permeameter Test
For determining coeffisient of permeability of compacted soil sample

Consist of :

Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d,inlet-outlet connector, overflow valve, porous stone.

Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter).

Graduated Cylinder : Glass made,100 ml capacity,single numbering.

Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min

Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
Compaction Test
ASTM D-698/D-1557; T-99/ T-180 / SNI-03-1742-1989

For determining moisture – density relationship.

Consist of :

Standard Proctor Mold : Machine steel, plated, 4″ i.d., 4.584″ height, 2″ height of collar.

Modified Proctor Mold : Machine steel, plated, 6″ i.d., 4.584″ height, 2″ height of collar.

Standard Proctor Hammer : Machine steel, plated, 12″ drop height, 5,5 lbs weight.

Modified Proctor Hammer : Machine steel, plated, 18″ drop height, 10 lbs weight.

Extruder : Steel frame, hydraulic jack.

Square Pan : Galvanized steel 65 x 65 x 7.5.

Thin Box : Alumunium, 60 gr capacity.

Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering.

Scoop : Cast alumunium, large size, round buttom.

Trowel : Pointed type, wooden handle.

Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds.

Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle.

Steel Wire Brush : Steel wire, wooden handle.

Dimension (l x w x h) : 62 x 62 x 40 Cm / Gross Weight : 120 Kg

Kontak Kami

Marketing Office:
Jl. Ciloa No. 116 Rt.03/Rw.10. Kp. Pameungpeuk, Ds. Pasirhalang, Kec. Cisarua. Kab. Bandung Barat, Jawa Barat 40551

Head Office:
Jl. Perisai F-12, Komp. Cilame Permai, Ngamprah, Kab. Bandung Barat 40552

Marketing Support ;
085222177772 / Deddy

Visitor Counter

Visit Today :

Visit Yesterday :

This Month :

This Year :

Total Visit : 0

Kontak Kami

Marketing Office:
Jl. Ciloa No. 116 Rt.03/Rw.10. Kp. Pameungpeuk, Ds. Pasirhalang, Kec. Cisarua. Kab. Bandung Barat, Jawa Barat 40551

Head Office:
Jl. Perisai F-12, Komp. Cilame Permai, Ngamprah, Kab. Bandung Barat 40552

Marketing Support ;
085222177772 / Deddy