Alat Laboratorium Teknik SIpil

HUBUNGI KAMI : 085222177772
  • Produk Alat Laboratorium Teknik Sipil
    • Laboratorium Tanah
    • Laboratorium Batuan
    • Laboratorium Semen
    • Laboratorium Beton
    • Laboratorium Aspal
    • Alat Lab Hidrolika – Alat Lab Mekanika Fluida
    • Peralatan Pertambangan
    • Peralatan Survey
    • General Equipment
  • Kalibrasi & Servis
  • Galeri Produk
    • Alat Laboratorium Tanah
    • Alat Laboratorium Batuan
    • Alat Laboratorium Semen
    • Alat Laboratorium Beton
    • Alat Laboratorium Aspal
    • Alat Laboratorium Hidrolika – Mekanika Fluida
  • Hubungi Kami
ALAT LABORATORIUMCIVIL, MINING, GENERAL EQUIPMENT
  • Home
  • Galeri
  • Alat Laboratorium Tanah
  • Moisture Content Test
May 12, 2025

Moisture Content Test

Moisture Content Test

For determining moisture content of soil sample.

Consist of :

  • Cent O-Gram Balance : 311 gr capacity x 0.01 gr readability Front beam : 1g x 0.01g ; second beam : 10g x 1g Third beam : 100g x 10g;  rear beam : 200g x 100g.
  • Drying Oven : 53 litre capacity ; natural air circulation, temperature  Stainless steel interior (w x h x d) = 400 x 400 x 330 mm. Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm.from +30 °C (however, at least 5 °C above ambient) up to +220 °C. Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C. Electric load (during heating) approx = 1400 Watt.
  • Thin Box : Alumunium, 60 gr capacity.
  • Dessicator : Transparent glass, 24 cm diameter approx non vacuum type, supplied with silica gel.

Dimension (l x w x h) : 80 x 80 x 90 Cm / Gross weight : 70 Kg

 

Category: Alat Laboratorium Tanah

Related products

  • Sieve Analysis (Fine Sieve)

    ASTM E-11

    For determining grain size distribution of soil particles or sand/ gravel, Brass frame 8″ diameter, 70 mm height.

    Dimension (l x w xh) : 22 x 22 x 6.5 / weight : 0.75 Kg

    • SIEVE # 4 : Brass round 8 inch diameter, mesh 4.75 mm  opening.
    • SIEVE # 8 : Brass round 8 inch diameter, mesh 2.36 mm  opening.
    • SIEVE # 10 : Brass round 8 inch diameter, mesh 2.00 mm  opening.
    • SIEVE # 12 : Brass round 8 inch diameter, mesh 1.70 mm  opening.
    • SIEVE # 16 : Brass round 8 inch diameter, mesh 1.18 mm  opening.
    • SIEVE # 20 : Brass round 8 inch diameter, mesh 0.850 mm  opening.
    • SIEVE # 30 : Brass round 8 inch diameter, mesh 0.600 mm  opening.
    • SIEVE # 40 : Brass round 8 inch diameter, mesh 0.425 mm  opening.
    • SIEVE # 50 : Brass round 8 inch diameter, mesh 0.300 mm  opening.
    • SIEVE # 60 : Brass round 8 inch diameter, mesh 0.250 mm  opening.
    • SIEVE # 70 : Brass round 8 inch diameter, mesh 0.212 mm  opening.
    • SIEVE # 80 : Brass round 8 inch diameter, mesh 0.180 mm  opening.
    • SIEVE # 100 : Brass round 8 inch diameter, mesh 0.150 mm  opening.
    • SIEVE # 120 : Brass round 8 inch diameter,mesh 0.125 mm  opening.
    • SIEVE # 140 : Brass round 8 inch diameter, mesh 0.106 mm  opening.
    • SIEVE # 170 : Brass round 8 inch diameter, mesh 0.090 mm  opening.
    • SIEVE # 200 : Brass round 8 inch diameter, mesh 0.075 mm  opening.
    • PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

     

  • Direct Shear Test Hand Operated

    ASTM D-3080  /  AASHTO T-236

    For determining shearing resistance of soil sample.

    Loading Machine Consist of :

    • Frame : Welded steel frame, hand operated gear box, 100 kg cap.
    • Loading Hanger : Machine steel, galvanized, supplied without load.
    • Shear Box : Cast alumunium box, 63.5 mm sample diameter,porous stone, loading capacity.
    • Loads : Slotted, machine steel, galvanized.
    • Load : 3167 gr weight.
    • Load : 6334 gr weight.
    • Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder.
    • Proving Ring : 100 kg capacity.
    • Dial Indicator : Range 10mm x 0.01mm.
    • Dial Indicator : Range 20mm x 0.01mm.
    • Wire Saw : 10 cm length approx.

    Dimension (l x w x h) : 130 x 20 x 130 cm / Gross Weight : 125 Kg

  • Sand Cone Test

    ASTM D-1556  /  AASHTO T-191, According Standard R-SNI 2828 :200

    For determining the density of compacted soil in place.

    Consist of :

    • Sand Cone Bottle : Plastic, 4 ltr. capacity. approx.
    • Sand Cone Funnel : Seamless metal, turning stopper, 6 1/2″ diameter bottom, 1/2 neck diameter.
    • Base Plate : Cast alumunium, 12″ x 12″.
    • Graduated Sand : Uncemented sand, passing # 10, retained # 60, 25 kg cap.
    • Sample Can : Round can, tinned metal.
    • Scoop : Cast alumunium, large size, round buttom.
    • Spoon :Stainless steel, large size.
    • Trowel : Pointed type, wooden handle.
    • Chisel : Hardened steel, 30 cm length.
    • Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle.

    Dimension (l x w x h): 70 x 50 x 50 cm / Gross weight:  50 Kg

     

Kontak Kami

Marketing Office:
Jl. Ciloa No. 116 Rt.03/Rw.10. Kp. Pameungpeuk, Ds. Pasirhalang, Kec. Cisarua. Kab. Bandung Barat, Jawa Barat 40551

Head Office:
Jl. Perisai F-12, Komp. Cilame Permai, Ngamprah, Kab. Bandung Barat 40552

Marketing Support ;
085222177772 / Deddy

Visitor Counter