Home
Galeri
Alat Laboratorium Tanah
Page 4

May 30, 2026

Alat Laboratorium Tanah

Alat Laboratorium Tanah

Showing 28–36 of 47 results

Mechanical end Over end Shaker

Electric, 220 V/ 50 Hz/ 1 Phase, 50 Rpm. Supplied complete with 2 glass jar 1000 ml and rubber bungs. Part used to Hydrometer analysis test set.

Dimension (l x w x h) : 40 x 60 x 60 cm / Gross weight : 30 Kg.
Moisture Content Test
For determining moisture content of soil sample.

Consist of :

Cent O-Gram Balance : 311 gr capacity x 0.01 gr readability Front beam : 1g x 0.01g ; second beam : 10g x 1g Third beam : 100g x 10g; rear beam : 200g x 100g.

Drying Oven : 53 litre capacity ; natural air circulation, temperature Stainless steel interior (w x h x d) = 400 x 400 x 330 mm. Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm.from +30 °C (however, at least 5 °C above ambient) up to +220 °C. Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C. Electric load (during heating) approx = 1400 Watt.

Thin Box : Alumunium, 60 gr capacity.

Dessicator : Transparent glass, 24 cm diameter approx non vacuum type, supplied with silica gel.

Dimension (l x w x h) : 80 x 80 x 90 Cm / Gross weight : 70 Kg
Plastic Limit Test Set
ASTM D-4318 / AASHTO T-90

For determining plastic limit of soil sample

Consist of :

Plastic Limit Plate : Glass made.

Reference Rod : Stainless steel rod, 3.2 mm diameter.

Glass Plate : Glass 10 mm thick, 30 x 30 cm.

Thin Box : Alumunium, 60 gr capacity.

Graduated Cylinder : Glass made,100 ml capacity,single numbering.

Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity.

Spatula : Plastic handle, stainless blade, 150 mm length.

Scraper : Plastic handle, stainless blade, 100 mm length.

Dimension (l x w x h) : 40 x 40 x 40 cm / Gross weight : 5 kg
PLATE BEARING TEST SET
ASTM D-1194 / AASHTO T-235

Consist of :

For determining ultimate bearing capacity of soil on place by means of field loading test.

Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated.

Manometer : 6″ diameter, 30 tons capacity, 0.5 tons,incremen.

Hydraulic Cylinder : 30 tons capacity.

Hydraulic Hand Pump : Double action, 10.000 psi capacity.

Hydraulic Hose : 10.000 psi, 180 cm length.

Reference Beam : Steel pipe, 2 x 150 cm span.

Circular Bearing Plate : 6″ diameter, machined steel, 1″ thick.

Circular Bearing Plate: 10″ diameter, machined steel, 1″ thick.

Circular Bearing Plate : 12″ diameter, machined steel, 1″ thick.

Circular Bearing Plate : 18″ diameter, machined steel, 1″ thick.

Circular Bearing Plate : 24″ diameter, machined steel, 1″ thick.

Circular Bearing Plate : 30″ diameter, machined steel, 1″ thick.

Square Bearing Plate : 12″ x 12″, machined steel, 1″ thick.

Dial Indicator : Travel range 30 x readibility 0.01 mm.

Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-off switch.

Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg
Proving Ring Penetrometer
For determining penetration resistance of soil layers.

Consist of :

Penetration Rod : Round bar, 51.5 cm/49 cm length with 5 cm increment lines.

Penetration Cone : Machine steel, hardened, plated, 1 sq. in cross section area 30 deg. angle.

Holder : Alumunium handle.

Carrying Case : Wooden case.

Proving Ring : 100 kg capacity.

Open End Wrench : Vanadium steel.

Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
SAMPLE EXTRUDER

SAMPLE EXTRUDER

For extruding soil speciment from 68 mm dia sampling tube (HAND BOR part), welded steel, screw type. Standard supply with instruction manual operating Supplied without sampling tube.

Dimension (l x w x h) : 125 x 15 x 25 Cm / Gross weight : 45 Kg
Sand Cone Test
ASTM D-1556 / AASHTO T-191, According Standard R-SNI 2828 :200

For determining the density of compacted soil in place.

Consist of :

Sand Cone Bottle : Plastic, 4 ltr. capacity. approx.

Sand Cone Funnel : Seamless metal, turning stopper, 6 1/2″ diameter bottom, 1/2 neck diameter.

Base Plate : Cast alumunium, 12″ x 12″.

Graduated Sand : Uncemented sand, passing # 10, retained # 60, 25 kg cap.

Sample Can : Round can, tinned metal.

Scoop : Cast alumunium, large size, round buttom.

Spoon :Stainless steel, large size.

Trowel : Pointed type, wooden handle.

Chisel : Hardened steel, 30 cm length.

Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle.

Dimension (l x w x h): 70 x 50 x 50 cm / Gross weight: 50 Kg
Shrinkage Limit Test
ASTM D-427 / AASHTO T-92

For determining shrinkage limit of soil sample

Consist of :

Prong Plate : 1.6 mm thick hard plastic, 76.2 mm square, 3 stainless steel needles, 0.8 mm dia, 3.2 mm height.

Monel Shrinkage Dish : Flat bottom; 44.4 mm i.d, 12.7 mm height approx.

Cristalizing Dish : Glass made.

Dish : Glass, 57.2 mm i.d, 12.7 mm height approx.

Overflow Dish : 9 cm dia approx.

Mercury : Bottled.

Glass Plate : Glass 10 mm thick, 30 x 30 cm.

Thin Box : Alumunium, 60 gr capacity.

Graduated Cylinder : Glass made,100 ml capacity,single numbering.

Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity.

Spatula : Plastic handle, stainless blade, 150 mm length.

Scraper : Plastic handle, stainless blade, 100 mm length.

Dimension (l x w x h) : 10 x 10 x 30 Cm / Gross weight : 6 Kg
Sieve Analysis (Fine Sieve)
ASTM E-11

For determining grain size distribution of soil particles or sand/ gravel, Brass frame 8″ diameter, 70 mm height.

Dimension (l x w xh) : 22 x 22 x 6.5 / weight : 0.75 Kg

SIEVE # 4 : Brass round 8 inch diameter, mesh 4.75 mm opening.

SIEVE # 8 : Brass round 8 inch diameter, mesh 2.36 mm opening.

SIEVE # 10 : Brass round 8 inch diameter, mesh 2.00 mm opening.

SIEVE # 12 : Brass round 8 inch diameter, mesh 1.70 mm opening.

SIEVE # 16 : Brass round 8 inch diameter, mesh 1.18 mm opening.

SIEVE # 20 : Brass round 8 inch diameter, mesh 0.850 mm opening.

SIEVE # 30 : Brass round 8 inch diameter, mesh 0.600 mm opening.

SIEVE # 40 : Brass round 8 inch diameter, mesh 0.425 mm opening.

SIEVE # 50 : Brass round 8 inch diameter, mesh 0.300 mm opening.

SIEVE # 60 : Brass round 8 inch diameter, mesh 0.250 mm opening.

SIEVE # 70 : Brass round 8 inch diameter, mesh 0.212 mm opening.

SIEVE # 80 : Brass round 8 inch diameter, mesh 0.180 mm opening.

SIEVE # 100 : Brass round 8 inch diameter, mesh 0.150 mm opening.

SIEVE # 120 : Brass round 8 inch diameter,mesh 0.125 mm opening.

SIEVE # 140 : Brass round 8 inch diameter, mesh 0.106 mm opening.

SIEVE # 170 : Brass round 8 inch diameter, mesh 0.090 mm opening.

SIEVE # 200 : Brass round 8 inch diameter, mesh 0.075 mm opening.

PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

1
2
3
4
5
6

TOP